technical data sheet opto interrupter itr ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 1 of 9 device no ?g drx-004-106 prepared date: 2007/08/08 prepared by: vic liao i features ? fast response time ? high sensitivity ? cut-off visible wavelength ? thin ? compact ? pb free i descriptions ITR20004 is a light reflection switch which includes a gaas ir-led transmitter and a np n photo transistor with a high photosensitive receiver for short distance, operating in the infrared range. both components ar e mounted side- by- side in a plastic package. i applications ? camera ? vcr ? floppy disk driver ? cassette type recorder ? various microcomputer control equipment i device selection guide device no. chip material ir gaas pt silicon
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 2 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao i package dimensions notes: 1.all dimensions are in millimeters 2.tolerances unless dimensions ? 0.25mm
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 3 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao i absolute maximum ratings (ta=25 j ) parameter symbol ratings unit power dissipation at(or below) 25 j free air temperature pd 130 mw reverse voltage v r 5 v forward current i f 50 ma input peak forward current (*1) pulse width ?? 100 g s, duty cycle=1% i fp 1 a collector power dissipation p c 75 mw collector current i c 50 ma collector-emitter voltage b v ceo 30 v output emitter-collector voltage b v eco 5 v operating temperature topr -25~+85 j storage temperature tstg -30~+85 j lead soldering temperature (*2) tsol 260 j ( ? 1) tw=100 g sec. , t=10 msec. ( ? 2) t=5 sec i electro-optical characteristics (ta=25 j ) parameter symbol min. typ. max. unit conditions forward voltage vf - 1.2 1.6 v if=20ma reverse current ir - - 10 g a vr=5v input peak wavelength f p - 940 - nm - output dark current iceo - - 0.1 g a vce=20v, b 34 - 71 collector current ic(on) c 20 - 90 ua vce=2v, if=4ma leakage current iceod - - 1 g a vce=5v, if=10ma rise time tr - 20 - g s transfer characteristics fall time tf - 20 - g s vce=2v ic=100ua rl=1000 ?
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 4 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao i typical electrical/optical/cha racteristics curves for ir
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 5 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao i typical electrical/optical/cha racteristics curves for pt
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 6 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao g ( k [ ) ( g i typical electrical/optical/cha racteristics curves for itr
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 7 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao ireliability test item and condition the reliability of products shall be satisfied w ith items listed below. confidence level ?g 90% ltpd ?g 10% no. item test conditions test hours/ cycles sample sizes failure judgement criteria ac/re 1 solderability temp. ?g 230 j? 5 j 5secs 22pcs more than 90% of lead to be covered by soldering 0/1 2 temperature cycle h : +85 j 30mins 5mins l : -55 j 30mins 50cycles 22pcs 0/1 3 thermal shock h :+100 j 5mins 10secs l :-10 j 5mins 50cycles 22pcs 0/1 4 high temperature storage temp. ?g +100 j 1000hrs 22pcs 0/1 5 low temperature storage temp. ?g -55 j 1000hrs 22pcs 0/1 6 dc operating life i f =20ma vce=5v 1000hrs 22pcs 0/1 7 high temperature/ high humidity 85 j / 85% r.h 1000hrs 22pcs i r ? u ?? 2 ee ?? l ?? 0.8 v f ? u ??1. 2 u ?g upper specification limit l ?g lower specification limit 0/1 i recommended method of storage the following are general recommendations for moisture sensitive level (msl) 4 storage and use: z shelf life in sealed bag: 12 months at < 40 c and < 90% relative humidity (rh) z after bag is opened, devices that will be subjected to reflow solder or other high temperature process must a) mounted within 72 hours of factor y conditions < 30 c/60%rh, or b) stored at <20% rh z devices require bake, before mounting, if: humidity indicator card is > 20% when read at 23 5 c z if baking is required, devices may be baked: a) 192 hours at 40 j ,and <5% rh(dry air/nitrogen) or b) 96 hours at 60 j ,and <5% rh for all device containers c) 24 hours at 125 c
ITR20004 everlight electronics co., ltd. http:\\www.everlight.com rev 2 page: 8 of 8 device no ?g drx-004-106 prepared date: 2007/8/8 prepared by: vic liao i packing specifications 1. 100 pcs/1 tube 2. 44 tube /1 box 3. 6 box/ 1 carton label form specification cpn: customer?s production number p/n : production number qty: packing quantity cat: none hue: none ref: reference lot no: lot number made in taiwan: production place notes 1. above specification may be changed without notice. everlight will reserve authority on material change for above specification. 2. when using this product, please observe the ab solute maximum ratings and the instructions for using outlined in these specification sh eets. everlight assumes no responsibility for any damage resulting from use of the product wh ich does not comply with the absolute maximum ratings and the instructions included in these specification sheets. 3. these specification sheets incl ude materials protected unde r copyright of everlight corporation. please don?t reproduce or cause anyone to reproduce them without everlight?s consent. everlight electronics co., ltd. tel: 886-2-2267-2000, 2267-9936 office: no 25, lane 76, sec 3, chung yang rd, fax: 886-2267-6244, 2267-6189, 2267-6306 tucheng, taipei 236, taiwan, r.o.c http:\\ www.everlight.com
|
